ASAHI SHORT PATH SYSTEM
60A (DN60mm), 100A (DN100mm)
For heat sensitive, high boiling point products, and high molecular weight materials!
This apparatus can provide uniform thin-film.
You can choose the standardized (Blue Label) or custom-made (Gold Label) product depending upon your needs.
What are the differences between thin film evaporators and short path evaporators?
|Max. Temperature||+200°C(JACKET)，+300°C（JACKET） IS ALSO AVAILABLE.
＞PTFE WIPER：+200°C, PBI*WIPER: +300°C
|Evaporation Surface Area||0.05M²(DN60)，0.1M²（DN100)|
|Operating Pressure||＞0.001 MBAR|
|Feed Rate||0.1 TO 1.5KG/H (DN60), 0.3 TO 3.0KG/H(DN100)|
|Max. viscosity at operating temperature||1,000MPAS|
|Max. Rotation Speed||400RPM|
・The parts that come into contact with the fluid are made of borosilicate glass 3.3, PTFE, and SS316.
・Sealing: Magnetic coupling
・The system does not include overhead stirrer, circulator, chiller and vacuum pump.
Minimum Thermal Decomposition
Perfect for highly viscous, heat sensitive, high boiling point products, and high molecular weight materials
Short residence time
Minimum pressure drop due to closely positioned internal condenser
High vacuum distillation
High Evaporation Efficiency
Allows easy evaporation
Uniform Rotating Wiper System
The thin film is formed by the centrifugal force for shorter residence time
Monitor the Process Visually
The main body of the evaporator is made of Borosilicate glass 3.3.
Grease-less Magnetic Sealed Bearing
Consistent torque throughout the entire temperature range
Easy cleaning and maintenance
Maximum Jacket Temperature
Temperature Range Up to +230℃
Upgradable up to + 300 ℃ with changed wiper, gasket, and o-rings